REF · edp-40pin-ipex-20455-cable-assembly

40-Pin eDP Cable for I-PEX 20455-Referenced Panel Interfaces

Name: 40-Pin eDP Cable for I-PEX 20455-Referenced Panel Interfaces
Brand: EDPcable
SKU: edp-40pin-ipex-20455-cable-assembly

Contact for Quote

SPEC SHEETeDP Cable Assemblies

SEC · 01

Product Overview

I-PEX 20455 is a panel-side receptacle reference, not enough information to select the cable plug or infer pitch, position count or eDP wiring. The complete receptacle number and original-maker mating data must be reconciled with the panel pin map before a cable BOM is released.

Application Scenarios

Mainboard-to-panel display links in notebooks, tablets and compact displays
Industrial HMI, embedded display and remote panel programs
Thin-bezel or hinge-routing designs with restricted cable space
Prototype and production builds requiring controlled impedance and repeatable assembly

Custom Options

Pin count, connector series, exit direction and cable length can be customized
Micro-coax, twisted-pair or hybrid structures can be selected per signal requirement
PI stiffeners, EMI tape, foam, grounding tabs and adhesive fixing can be added
Sample validation can be aligned with the actual LCD panel, mainboard connector and hinge path

RFQ Inputs & Material Requirements

Send the full 20455 receptacle number, verified mating plug, panel model and pin map, board connector, lane assignment, cable construction, shield and ground plan, finished length, bend envelope and display-link acceptance criteria.

SEC · 02

Technical Specifications

SPECIFICATIONS · 12 ROWS

01Panel-Side Receptacle Reference: Complete customer-specified I-PEX CABLINE-VS 20455 part number
02Cable-Side Mating Part: Exact plug selected from original-maker mating data; not inferred from the series name
03Position and Pin Map: 40 positions only when confirmed by the panel datasheet and controlled drawing
04Connector Pitch: Original-maker mating drawing value; not inferred from the receptacle reference
05Signal Definition: eDP lanes, AUX, panel power, backlight and control assignment from the panel pin map
06Cable Construction: Approved micro-coax, twisted-pair or hybrid build matched to the connector terminations
07Differential-Impedance Acceptance: Target, tolerance, coupons, fixtures and method defined by the link validation plan
08Shield and Ground Plan: Drain, shell, foil, tape and chassis termination fixed in the drawing
09Finished Length: Controlled drawing dimension and tolerance
10Installed Bend and Motion: Hinge or bezel envelope and validation cycle supplied by the customer
11Environmental Exposure: Project-defined temperature and device conditions
12Electrical Validation: Pin-map, continuity and display-link tests with acceptance criteria from the device program